Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Investigation of Halloysite Nanotube Effect in Poly– (Lactic acid)/Hydroxyapatite Coatings on Ti–6Al–4V Biomedical Alloy

Topuz M.
JOURNAL OF POLYMERS AND THE ENVIRONMENT , cilt.9, ss.1, 2023 (SCI-Expanded)

Hydroxyapatite – Al2O3 reinforced poly– (lactic acid) hybrid coatings on magnesium: Characterization, mechanical and in-vitro bioactivity properties

Topuz M.
Surfaces and Interfaces , cilt.37, ss.102724, 2023 (SCI-Expanded)

Effect of hydroxyapatite:zirconia volume fraction ratio on mechanical and corrosive properties of Ti-matrix composite scaffolds

Topuz M., DİKİCİ B., Gavgali M., Yilmazer Y.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA , cilt.32, sa.3, ss.882-894, 2022 (SCI-Expanded) Creative Commons License identifier identifier identifier

Processing of Ti/(HA+ZrO2) biocomposite and 50% porous hybrid scaffolds with low Young's modulus by powder metallurgy: Comparing of structural, mechanical, and corrosion properties

Topuz M., Dikici B., Gavgalı M., Kaseem M.
MATERIALS TODAY COMMUNICATIONS , cilt.29, ss.1-11, 2021 (SCI-Expanded)

Titanium-based composite scaffolds reinforced with hydroxyapatite-zirconia: Production, mechanical and in-vitro characterization

Topuz M., DİKİCİ B., GAVGALI M.
Journal of the Mechanical Behavior of Biomedical Materials , cilt.118, 2021 (SCI-Expanded) identifier identifier identifier

Al-5Cu/B4Cp composites: The combined effect of artificially aging (T6) and particle volume fractions on the corrosion behaviour

Tozkoparan B., Dikici B., Topuz M., Bedir F., Gavgalı M.
Advanced Powder Technology , cilt.31, sa.7, ss.2833-2842, 2020 (SCI-Expanded)

Synthesis of biphasic calcium phosphate (BCP) coatings on β‒type titanium alloys reinforced with rutile-TiO2 compounds: adhesion resistance and in-vitro corrosion

DİKİCİ B., Niinomi M., Topuz M., Koc S., Nakai M.
Journal of Sol-Gel Science and Technology , cilt.87, sa.3, ss.713-724, 2018 (SCI-Expanded) identifier identifier

Synthesis and Characterization of Hydroxyapatite/TiO2 Coatings on the beta-Type Titanium Alloys with Different Sintering Parameters using Sol-Gel Method

DİKİCİ B., Niinomi M., Topuz M., Say Y., AKSAKAL B., YILMAZER H., et al.
PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES , cilt.54, sa.3, ss.457-462, 2018 (SCI-Expanded) identifier identifier

Production of Annealed Cold-Sprayed 316L Stainless Steel Coatings for Biomedical Applications and Their in-vitro Corrosion Response

DİKİCİ B., Topuz M.
PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES , cilt.54, sa.2, ss.333-339, 2018 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Simultaneous effect of welding current with post-weld T6 heat-treatment on corrosion susceptibility of Al6013 alloy joined by GTAW

Topuz M.
Hittite Journal of Science and Engineering , cilt.10, sa.3, ss.269-277, 2023 (Hakemli Dergi)

In-vitro corrosion performance of hydroxyapatite-coated Al2024 in simulated body fluid: A comparative study

Topuz M., Dikici B.
Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi , cilt.12, sa.3, ss.926-934, 2023 (Hakemli Dergi)

Effect of ZrO2 on morphological and adhesion properties of hydroxyapatite reinforced poly– (lactic) acid matrix hybrid coatings on Mg substrates

Topuz M.
Research on Engineering Structures and Materials , cilt.8, sa.4, ss.721-733, 2022 (Scopus) identifier identifier

Challenges in the Production of Titanium–based Scaffolds Bio–functionalized with Hydroxyapatite by Powder Metallurgy Technique

TOPUZ M., DİKİCİ B., GAVGALI M.
European Journal of Science and Technology , sa.28, ss.46-51, 2021 (Hakemli Dergi)

Two simple methods for surface modification of lithium disilicate dental blocks with hydroxyapatite

Topuz M., Dikici B.
Research on Engineering Structures and Materials , cilt.6, sa.1, ss.97-104, 2019 (Hakemli Dergi)

A Review on the Hydrogels used in 3D Bio-printing

Topuz M., DİKİCİ B., GAVGALI M., YILMAZER H.
International Journal of 3D Printing Technologies and Digital Industry , cilt.2, sa.2, ss.68-75, 2018 (Hakemli Dergi)

Zirkonya Takviyeli Hidroksiapatit (HA) Bazlı Biyoaktif Hibrid Kaplamaların Korozyon Duyarlılıkları

TOPUZ M., DİKİCİ B., KOÇ S., YILMAZER H., NIINOMI M., MASAAKI N.
Engineering Sciences , cilt.12, sa.1, ss.66-77, 2017 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

A Preliminary Study on 304SS Wire Mesh Reinforced Al6013 Composite

Topuz M.
Cukurova 10th International Scientific Researches Conference, Adana, Türkiye, 2 - 04 Nisan 2023

The Effect of Unit Cell Geometry and Fill Rate on the Mechanical Strength of 3D Printed Poly–(Lactic) Acid Scaffolds

Topuz M.
9th International Engineering Architecture and Design Congress, İstanbul, Türkiye, 14 - 16 Mayıs 2022, ss.1-7

Flexural Behavior of 304SS and Glass Fiber Reinforced Polymer Composite Laminates

Topuz M.
7th International Congress on Engineering and Management, İstanbul, Türkiye, 16 - 18 Nisan 2022, ss.884

The production method of titanium-based biocomposite scaffolds reinforced with hydroxyapatite-zirconia: A patent analysis

Topuz M., Gavgalı M., Dikici B.
2nd International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 31 Mart - 02 Nisan 2022, ss.1

Thermal Performance of Functional Graded Composite Material

Gökaslan M. Y., Topuz M., Kösedağ E.
3rd International Eurasian Conference on Science, Engineering and Technology, Ankara, Türkiye, 15 - 17 Aralık 2021, ss.75

Mechanical Behavior of AL6061-Pumice Functionally Graded Composite Materials

Kösedağ E., Topuz M., Gökaslan M. Y.
International Pumice and Perlite Symposium, Bitlis, Türkiye, 4 - 06 Kasım 2021, ss.27

Production and characterization of pumice reinforced Al6061 matrix functional graded composite materials

Topuz M., Kösedağ E., Gökaslan M. Y.
1st International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 1 - 03 Kasım 2021, ss.656

Challenges in the production of titanium–based scaffolds bio–functionalized with hydroxyapatite by powder metallurgy technique

Topuz M., Dikici B., Gavgalı M.
1st International Conference on Applied Engineering and Natural Sciences, Konya, Türkiye, 1 - 03 Kasım 2021, ss.42

B4C Partikül Takviyeli Al‒Cu Matrisli Kompozitler: T6 Isıl İşleminin Korozyon Davranışı Üzerine Etkisi

TOZKOPARAN B., DİKİCİ B., TOPUZ M., BEDİR F., GAVGALI M.
The International Aluminium-Themed Engineering and Natural Sciences Conference “IATENS-2019”, Konya, Türkiye, 04 Ekim 2019, ss.58-61

Al–5Cu/B4Cp Hot-Pressed Composites: The Effect of Particle Volume Fraction on Microstructure and Corrosion Behavior

Dikici B., TOZKOPARAN B., Topuz M., BEDİR F., GAVGALI M.
X International Symposium on Materials (MATERIAIS 2019), Lizbon, Portekiz, 14 - 17 Nisan 2019, ss.129

Preparation of Hydroxyapatite/Chitosan Hybrid Coatings on ß-Type Ti alloys and Theirs In-vitro Corrosion Resistance

Topuz M., Dikici B., Niinomi M., YILMAZER H., Nakai M.
X International Symposium on Materials (MATERIAIS 2019), Lizbon, Portekiz, 14 - 17 Nisan 2019, ss.59

A Review on the Hydrogels Used in 3D Bioprinting

Topuz M., Dikici B., Gavgalı M., Yılmazer H.
3rd INTERNATIONAL CONGRESS ON 3D PRINTING TECHNOLOGIES AND DIGITAL INDUSTRY 2018, Antalya, Türkiye, 19 - 21 Nisan 2018, ss.135-138

Bioactive Surface Modification With Bioglass/Hydroxyapatite Of Biomedical Titanium Alloys And Their Beneficial Effect On Corrosion Resistance

Topuz M., DİKİCİ B., Koç S., NAKAI M., NIINOMI M.
1st International Symposium on Light Alloys and Composite Materials, Karabük, Türkiye, 22 - 24 Mart 2018, ss.317-318

The Synthesis and Determination of Mechanical Properties of Metal Oxide-Reinforced Hydroxyapatite Based Ceramic Coatings

Topuz M., Koç S., Dikici B., Nıınomı M., Nakaı M., Yılmazer H.
2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC 2017), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.378

In-vitro Corrosion Responses of Bioactive Hybrid Coatings

Dikici B., Nıınomı M., Topuz M., Koç S., Yılmazer H., Nakaı M.
2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC 2017), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.379

Sol-gel bioactive coatings on β-type titanium alloys for improvement of biocompatibility: Cell culture response

TAŞPINAR M., TOPUZ M., KOÇ S., DİKİCİ B., KÜÇÜK V., NIINOMI M., et al.
2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.380

Comparison of corrosion behaviors of ß-type Ti29Nb13Ta4.6Zr alloys with α and α+ß type titanium alloys

Dikici B., Nıınomı M., Topuz M., Yılmazer H., Nakaı M.
2nd International Conference on Advanced Engineering Technologies (ICADET 2017), Bayburt, Türkiye, 21 - 23 Eylül 2017, ss.1

Silver/Hydroxyapatite Hybrid Coatings on Ti-6Al-4V Surfaces by Sol-Gel Method

DİKİCİ B., Koç S., Topuz M., NIINOMI M., NAKAI M.
European Congress and Exhibition on Advanced Materials and Processes (EUROMAT 2017), Thessaonıkı, Yunanistan, 17 - 22 Eylül 2017, ss.1

Structural characterization and in-vitro corrosion response of HA/TiO2 composite coatings on Ti-6Al-4V

Topuz M., DİKİCİ B., Koç S., NIINOMI M., NAKAI M.
20th International Corrosion Congress & Process Safety Congress 2017 (EUROCORR 2017), Prag, Çek Cumhuriyeti, 3 - 07 Eylül 2017, ss.1-10

The Effect of Hydroxyapatite Based Bioactive Coatings Reinforced with TiO2 Particles on the Corrosion Resistance of Grade 2 CP Ti

Topuz M., DİKİCİ B., (Güngör) Koç S., Niinomi M., Nakai M.
The 22nd Biomedical Science and Technology Symposium (BIOMED2017), Ankara, Türkiye, 12 - 14 Mayıs 2017

Al-Cu metal matrisli kompozitlerin korozyon davranışı üzerine B4C partikül hacim oranı ve yaşlandırma işleminin birleşik etkisi

TOZKOPARAN B., Dikici B., BEDİR F., Topuz M., GAVGALI M.
II. Savunma Sanayi Sempozyumu, Kırıkkale, Türkiye, 6 - 08 Nisan 2017, ss.1-8

Preparation and Characterization of Chitosan/Hydroxyapatite Sol-gel Coating on Ti-6Al-4V

(Güngör) Koç S., Dikici B., Topuz M., Yılmazer H., Ozdemır I., Niinomi M., et al.
6th International Conference on Advanced Materials and Systems (ICAMS 2016), Bucuresti, Romanya, 20 - 22 Ekim 2016, ss.1

Zirkonya Takviyeli Hidroksiapatit (HA) Bazlı Biyoaktif Hibrid Kaplamaların Korozyon Duyarlılıkları

Topuz M., Dikici B., (Güngör) Koç S., Yılmazer H., Nakai M., Niinomi M.
14. Uluslararası Korozyon Sempozyumu (KORSEM 2016), Bayburt, Türkiye, 5 - 07 Ekim 2016, ss.1-10

Synthesis and Characterization of Sol-gel Hydroxyapatite Coatings on the Beta Type Titanium Alloys: the Effect of Sintering Conditions

Dikici B., Topuz M., (Güngör) Koç S., Yılmazer H., Niinomi M.
3rd International Conference on Advanced Technology & Sciences (ICAT'16), Konya, Türkiye, 1 - 03 Eylül 2016, ss.295

Beta (ß)-Tipi Titanyum Alaşımlarının Elektorkimyasal Korozyon Davranışı Üzerine Hydroxyapatite Esaslı Biyoaktif Kaplamaların Etkisi

Dikici B., Topuz M., (Güngör) Koç S., Yılmazer H., Niinomi M., Nakai M.
12. Ulusal Kimya Mühendisliği Kongresi UKMK2016, İzmir, Türkiye, 23 - 26 Ağustos 2016, ss.419

Metal Oksit Takviyeli Hidroksiapatit (HA) Bazlı Biyoaktif Hibrid Kaplamalar Üzerine Bazı Çalışmalar

Topuz M., Dikici B., Güngör S.
International Conference on Material Science and Technology in Cappadocia, Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.511-516

Bankamatiklerde Gümüş Kaplamalı Antibakteriyel Tuş Takımı Kullanımı

TOPUZ M., TOPUZ A.
Metalik Fikirler 4. Ar-Ge Proje Pazarı, İstanbul, Türkiye, 8 - 10 Ekim 2015

Beta ß Tipi Titanyum Alaşımları Üzerine Biyoaktif Hibrid Kaplamaların Üretilmesi Karakterizasyonu ve İnVitro Korozyon Özelliklerinin Araştırılması

TOPUZ M.
Metalik Fikirler 4. Ar-Ge Proje Pazarı, İstanbul, Türkiye, 8 - 10 Ekim 2015

Kitap & Kitap Bölümleri

Production technique–structure relationship in bioceramic-coated scaffold applications

Aslan N., Topuz M., Aksakal B., Dikici B.
Advanced Ceramic Coatings for Biomedical Applications, Ram K. Gupta,Amir Motallebzadeh,Saeid Kakooei,Tuan Anh Nguyen,Ajit Behera, Editör, Elsevier Science, Oxford/Amsterdam , Amsterdam, ss.165-196, 2023

Synthesis of implantable ceramic coatings and their properties

Topuz M., Yiğit O., Kaseem M., Dikici B.
Advanced Ceramic Coatings for Biomedical Applications, Ram K. Gupta,Amir Motallebzadeh,Saeid Kakooei,Tuan Anh Nguyen,Ajit Behera, Editör, Elsevier Science, Oxford/Amsterdam , Amsterdam, ss.53-86, 2023

Metrikler

Yayın

48

Atıf (WoS)

139

H-İndeks (WoS)

7

Atıf (Scopus)

167

H-İndeks (Scopus)

8

Proje

8

Fikri Mülkiyet

1

Açık Erişim

5