Yayınlar & Eserler

Yayın Ağı
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Evaluation of the cutting forces, the surface roughness, and the tool wear characteristics during machining of cobalt-based superalloy Haynes 188 with ceramic cutting tool

Altın A.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING , cilt.236, sa.3, ss.805-813, 2022 (SCI-Expanded) identifier identifier

On the Tensile Behaviour of Bio-Sourced 3D-Printed Structures from a Microstructural Perspective

Guessasma S., Belhabib S., Altın A.
POLYMERS , cilt.12, sa.5, 2020 (SCI-Expanded) identifier identifier identifier

THE EFFECT OF THE CUTTING SPEED ON THE CUTTING FORCES AND SURFACE FINISH WHEN MILLING CHROMIUM 210 Cr12 STEEL HARDFACINGS WITH UNCOATED CUTTING TOOLS

Altin A.
MATERIALI IN TEHNOLOGIJE , cilt.48, sa.3, ss.373-378, 2014 (SCI-Expanded) identifier identifier

OPTIMIZATION OF THE TURNING PARAMETERS FOR THE CUTTING FORCES IN THE HAS TELLOY X SUPERALLOY BASED ON THE TAGUCHI METHOD

Altin A.
MATERIALI IN TEHNOLOGIJE , cilt.48, sa.2, ss.249-254, 2014 (SCI-Expanded) identifier

OPTIMIZATION OF TURNING MACHINIG PARAMETERS IN INCONEL 600 SUPER ALLOY

Altin A.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.28, sa.4, ss.677-684, 2013 (SCI-Expanded) identifier identifier

The Effects of Cutting Speed on Tool Wear and Tool Life When Turning Inconel 718 with Ceramic and Coated Carbide Inserts

Taskesen A., Altin A., Nalbant M.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , cilt.60, sa.4, ss.445-449, 2007 (SCI-Expanded) identifier identifier

The effects of a tool's chemical composition on its performance when turning inconel 718 with ceramic inserts

Altin A., Taskesen A., Nalbant M., Seker U.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING , cilt.53, sa.6, ss.379-385, 2007 (SCI-Expanded) identifier identifier

The effects of cutting speed on tool wear and tool life when machining Inconel 718 with ceramic tools

Altin A., Nalbant M., Taskesen A.
MATERIALS & DESIGN , cilt.28, sa.9, ss.2518-2522, 2007 (SCI-Expanded) identifier identifier

The effect of cutting speed and cutting tool geometry on machinability properties of nickel-base Inconel 718 super alloys

Nalbant M., Altin A., Gokkaya H.
MATERIALS & DESIGN , cilt.28, sa.4, ss.1334-1338, 2007 (SCI-Expanded) identifier identifier

The effect of coating material and geometry of cutting tool and cutting speed on machinability properties of Inconel 718 super alloys

Nalbant M., Altin A., Gokkaya H.
MATERIALS & DESIGN , cilt.28, sa.5, ss.1719-1724, 2007 (SCI-Expanded) identifier identifier
Diğer Dergilerde Yayınlanan Makaleler

A Precision Analysis of Machining Incoloy 901 Aerospace Materials with Cemented Carpide Tools by the Taguchi Method

Altın A.
Materials Science Forum , cilt.1085, ss.133-137, 2023 (Scopus) identifier

A comparative study on optimization of machining parameters by turning aerospace materials according to Taguchi method

Altın A.
INTERNATIONAL JOURNAL FOR SIMULATION AND MULTIDISCIPLINARY DESIGN OPTIMIZATION , cilt.8, ss.1-8, 2017 (Scopus)

İşleme parametrelerinden kesme hızının Inconel 718 süper alaşımın işlenebilirliğine etkisi

Altın A.
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi (SCI Dergi) , cilt.4, sa.4, ss.677-684, 2013 (Hakemli Dergi)

The effect of cutting speed on the machinability of Thyrodur 2379 mold steel on vertical machining center

Altın A.
European International Journal of Science and Technology (EIJST) , cilt.1, sa.2, ss.48-62, 2012 (Hakemli Dergi)
Metrikler

Yayın

29

Atıf (WoS)

247

H-İndeks (WoS)

4

Atıf (Scopus)

314

H-İndeks (Scopus)

3

Proje

7

Tez Danışmanlığı

2
BM Sürdürülebilir Kalkınma Amaçları