Effect of Temperature and Illumination on the Current-Voltage Characteristics of a Al/p-GaSe/In Diode


Budak H., Duman S., Kaya F. Ş., Ashkhasi A., GÜRBULAK B.

JOURNAL OF ELECTRONIC MATERIALS, cilt.49, sa.10, ss.5698-5704, 2020 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 49 Sayı: 10
  • Basım Tarihi: 2020
  • Doi Numarası: 10.1007/s11664-020-08322-4
  • Dergi Adı: JOURNAL OF ELECTRONIC MATERIALS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, PASCAL, Applied Science & Technology Source, Chemical Abstracts Core, Chimica, Compendex, Computer & Applied Sciences, INSPEC
  • Sayfa Sayıları: ss.5698-5704
  • Anahtar Kelimeler: Layered semiconductor, GaSe, Schottky diode, thermoionic emission, ELECTRICAL-PROPERTIES, SCHOTTKY CONTACT, TRANSPORT, PARAMETERS, DEPENDENCE, GROWTH, INSE
  • Van Yüzüncü Yıl Üniversitesi Adresli: Hayır

Özet

In this study, Al/p-GaSe/In Schottky diodes (SDs) were fabricated by using ap-type GaSe semiconductor grown by the Brigdman-Stockbarger method. Current-voltage (I-V) measurements of the Al/p-GaSe/In diode were carried out from 100 K to 400 K with steps of 20 K in the +2 V- (-2) V voltage range and in the dark. The characteristic parameters of SDs were calculated from ln(I)-Vcharacteristics according to the thermoionic emission (TE) theory and from modified Norde's functions depending on the sample temperature. The barrier height (BH) values calculated from ln(I)-Vand Norde's functions were in agreement. The values of BH and ideality factor (IF) calculated from ln(I)-Vcharacteristics for the SD ranged from 0.97 eV and 1.01 at 400 K to 0.45 eV and 2.18 at 100 K, respectively. The value of serial resistance (R-s) calculated from modified Norde's functions of the SD decreased with increasing temperature. Also, the reverse bias current value of the Al/p-GaSe/In SD under light illumination was higher than the current value in the dark. Thus, the obtained results show that the prepared Al/p-GaSe/In diode might be used as a photodiode in the optoelectronic applications.