Fe3O4/Mn3O4/ZnO-rGO hybrid quaternary nano-catalyst for effective treatment of tannery wastewater with the heterogeneous electro-Fenton process: Process optimization

Öztürk D.

SCIENCE OF THE TOTAL ENVIRONMENT, cilt.828, 2022 (SCI-Expanded) identifier identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 828
  • Basım Tarihi: 2022
  • Doi Numarası: 10.1016/j.scitotenv.2022.154473
  • Dergi Adı: SCIENCE OF THE TOTAL ENVIRONMENT
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, Academic Search Premier, PASCAL, Aerospace Database, Analytical Abstracts, Aqualine, Aquatic Science & Fisheries Abstracts (ASFA), BIOSIS, Biotechnology Research Abstracts, CAB Abstracts, Chemical Abstracts Core, Chimica, Communication Abstracts, Compendex, EMBASE, Environment Index, Food Science & Technology Abstracts, Geobase, Greenfile, MEDLINE, Metadex, Pollution Abstracts, Public Affairs Index, Veterinary Science Database, Civil Engineering Abstracts
  • Anahtar Kelimeler: Catalyst, Central composite design, Heterogeneous electro Fenton, In-situ H2O2, Magnetic separable, Wastewater, RHODAMINE-B, MN3O4 NANOPARTICLES, DEGRADATION, OXIDATION, DYE, PERFORMANCE, CARBON, CO, REACTIVITY, REMOVAL
  • Van Yüzüncü Yıl Üniversitesi Adresli: Evet

Özet

This study investigated chemical oxygen demand (COD) removal from tannery wastewater (TWW) with a novel Fe3O4/Mn3O4/ZnO-rGO heterogeneous electro Fenton (HEF) hybrid magnetically-separable nano-catalyst. The graphite cathode and Ti/IrO2/RuO2 anode were used in the HEF process. With aeration (2 L/min), in-situ H2O2 generation occurred. The nano-catalyst was characterized by XRD, XPS, DES, FT-1R, zeta potential, SEM, TEM, and BET techniques in detail. The system was modelled with a central composite design and optimized numerically. The established model was adequate, valid, reliable, and reproducible to predict the COD removal efficiency. center dot OH and center dot O-2(-) were the oxidative species responsible for organic matter degradation. The effect of different processes was investigated, and efficiency was ranked from high to low as; HEF > anodic oxidation-H2O2 > anodic oxidation > adsorption. Under the optimum conditions; pH: 3.5, current density: 7.37 mA/cm(2), reaction time: 79.43 min, and catalyst dose: 0.06 g/L, COD removal efficiency reached a maximum of 97.08%. The energy consumption and cost to remove 1 kg COD were 10.87 kWh and $1.41. The degradation of COD fitted the pseudo-first-order model. The nano-catalyst was stable and reusable with a minimum yield of 78.12% after 5 cycles.