Experimental investigation on properties of recycled aggregate concrete with optimized Ball Milling Method


Dilbas H., Cakir O., Atis C. D.

CONSTRUCTION AND BUILDING MATERIALS, cilt.212, ss.716-726, 2019 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 212
  • Basım Tarihi: 2019
  • Doi Numarası: 10.1016/j.conbuildmat.2019.04.007
  • Dergi Adı: CONSTRUCTION AND BUILDING MATERIALS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.716-726
  • Anahtar Kelimeler: Recycled aggregate, Optimization, Ball milling method, Mechanical properties, Physical properties, Regression analysis, MECHANICAL-PROPERTIES, PHYSICAL-PROPERTIES, CURING CONDITIONS, DEMOLITION WASTE, RCA CONCRETE, PERFORMANCE, CONSTRUCTION
  • Van Yüzüncü Yıl Üniversitesi Adresli: Hayır

Özet

Numerous research studies were conducted to improve the weak properties of recycled aggregate as a construction material during the last two decades. Most of these studies mainly focused on minimizing the undesired characteristics of the recycled aggregate through various treatment techniques to strengthen the attached old mortar or remove it from the recycled aggregate. Mechanical Treatment Methods (MTMs) used to remove the attached mortar from the aggregates were evolved over the years. Among available methods of treatments in the literature, the number of studies investigated the MTMs with an optimization process is limited. In lack of proper optimization process with rubble quality identification, mechanical treatment methods may be ineffective to provide concretes with sufficient properties, and they may yield to extra energy consumption and carbon emission. In other words, the optimization of treatment methods and determination rubble quality are two essential steps for having satisfactory results on the recycled aggregate.