Determination of compaction parameters by image analysis technique
Advanced Engineering Science, cilt.2023, sa.3, ss.137-157, 2023 (Hakemli Dergi)
- Yayın Türü: Makale / Tam Makale
- Cilt numarası: 2023 Sayı: 3
- Basım Tarihi: 2023
- Dergi Adı: Advanced Engineering Science
- Derginin Tarandığı İndeksler: Other Indexes
- Sayfa Sayıları: ss.137-157
- Van Yüzüncü Yıl Üniversitesi Adresli: Evet
Özet
In this study, the control of compaction parameters for a stabilized filling material that is
used in Granular Subbase (GSB) construction was examined by image analysis. Whether
the specimen coming from the field met the GSB conditions was checked, and its void
ratio was examined by image analysis. For this process, the specimens that were
prepared by mixing epoxy at different ratios were cut from a certain distance.
Photographs were taken from the cut pieces using a SONY HSC-400 camera. For this
purpose, specimens containing epoxy by 4%, 6%, 8%, and 10% were prepared. The
ratios of the void found on the cut specimens were calculated. The void ratios that were
calculated by using the eglobal formula and those calculated by image processing methods
were compared, and the void ratio was determined at an accuracy rate of 86.12% for the
specimen that contained epoxy at a ratio of 8%.