Publications & Works

Publication Network

Published journal articles indexed by SCI, SSCI, and AHCI

Numerical Studies on the Oil–Water Mixture Separation by Corrugated Plates with Hooks and Holes in Various Shapes and Configurations

Oruç M., Salih M., Yayla S., BAYRAKTAR S.
Arabian Journal for Science and Engineering , 2024 (SCI-Expanded) identifier

Experimental Investigation and Optimization Analysis of a Designed Wastewater Treatment System

Oruç M., Yayla S.
Journal of Environmental Engineering (United States) , vol.149, no.7, 2023 (SCI-Expanded) Sustainable Development identifier

EXPERIMENTAL INVESTIGATION OF OIL-IN WATER SEPARATION USING CORRUGATED PLATES AND OPTIMIZATION OF SEPARATION SYSTEM

Oruç M., Yayla S.
SEPARATION SCIENCE AND TECHNOLOGY , vol.57, no.5, pp.788-800, 2022 (SCI-Expanded) identifier identifier

Estimation of target station data using satellite data and deep learning algorithms

Yayla S., Harmanci E.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH , vol.45, no.1, pp.961-974, 2021 (SCI-Expanded) Sustainable Development identifier identifier

A case study on piezoelectric energy harvesting with using vortex generator plate modeling for fluids

Yayla S., Ayca S., Oruç M.
RENEWABLE ENERGY , vol.157, pp.1243-1253, 2020 (SCI-Expanded) Sustainable Development identifier identifier

Control of flow structures around a cylinder in deep water employing a passive control element

Yayla S., Tekşin S., ŞAHİN B.
FLUID DYNAMICS RESEARCH , vol.51, no.5, 2019 (SCI-Expanded) identifier identifier

Numerical Analysis of a Two-Phase Flow (Oil and Gas) in a Horizontal Separator used in Petroleum Projects

Yayla S., Kamal K., Bayraktar S.
JOURNAL OF APPLIED FLUID MECHANICS , vol.12, no.4, pp.1037-1045, 2019 (SCI-Expanded) Sustainable Development identifier identifier

Flow measurement around a cylindrical body by attaching flexible plate: A PIV approach

Yayla S., Tekşin S.
FLOW MEASUREMENT AND INSTRUMENTATION , vol.62, pp.56-65, 2018 (SCI-Expanded) identifier identifier

Effects of Trailing-Edge Attachment on the Flow Structure over a Generic Delta Wing

Canpolat C., Yayla S., Sahin B., Akilli H.
JOURNAL OF AEROSPACE ENGINEERING , vol.30, no.5, 2017 (SCI-Expanded) identifier identifier

Effects of flexible plate attached to the rear of the cylinder on flow structure

Tekşin S., Yayla S.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , vol.31, no.3, pp.1195-1201, 2017 (SCI-Expanded) identifier identifier

Numerical investigation of coalescing plate system to understand the separation of water and oil in water treatment plant of petroleum industry

Yayla S., Ibrahim S. S., OLCAY A. B.
ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS , vol.11, no.1, pp.184-192, 2017 (SCI-Expanded) Sustainable Development identifier identifier

Effects of Flexible Splitter Plate in the Wake of a Cylindrical Body

Tekşin S., Yayla S.
JOURNAL OF APPLIED FLUID MECHANICS , vol.9, no.6, pp.3053-3059, 2016 (SCI-Expanded) identifier identifier

Computational Fluid Dynamics and Heat Transfer Analysis for a Novel Heat Exchanger

Ma H., Oztekin D. E., BAYRAKTAR S., Yayla S., Oztekin A.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME , vol.137, no.5, 2015 (SCI-Expanded) identifier identifier

Wall proximity effects on flow over cylinders with different cross sections

BAYRAKTAR S., Yayla S., Oztekin A., Ma H.
CANADIAN JOURNAL OF PHYSICS , vol.92, no.10, pp.1141-1148, 2014 (SCI-Expanded) identifier identifier

The effect of angle of attack on the flow structure over the nonslender lambda wing

Yayla S., CANPOLAT Ç., ŞAHİN B., AKILLI H.
AEROSPACE SCIENCE AND TECHNOLOGY , vol.28, no.1, pp.417-430, 2013 (SCI-Expanded) identifier identifier

Flow Characteristic of Staggered Multiple Slotted Tubes in the Passage of a Fin Tube Heat Exchanger

Yayla S.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING , vol.59, pp.462-472, 2013 (SCI-Expanded) identifier identifier

Flow structure over the yawed nonslender diamond wing

ŞAHİN B., Yayla S., CANPOLAT Ç., AKILLI H.
AEROSPACE SCIENCE AND TECHNOLOGY , vol.23, no.1, pp.108-119, 2012 (SCI-Expanded) identifier identifier

Observation of the Vortical Flow over a Yawed Delta Wing

CANPOLAT Ç., Yayla S., ŞAHİN B., AKILLI H.
JOURNAL OF AEROSPACE ENGINEERING , vol.25, no.4, pp.613-626, 2012 (SCI-Expanded) identifier identifier

WIND ENERGY POTENTIAL ON THE COAST OF LAKE VAN

YUMAK H., Ucar T., Yayla S.
INTERNATIONAL JOURNAL OF GREEN ENERGY , vol.9, no.1, pp.1-12, 2012 (SCI-Expanded) identifier identifier

Yaw Angle Effect on Flow Structure over the Nonslender Diamond Wing

Yayla S., CANPOLAT Ç., ŞAHİN B., AKILLI H.
AIAA JOURNAL , vol.48, no.10, pp.2457-2461, 2010 (SCI-Expanded) identifier identifier

EFFECT OF YAW ANGLE ON THE FORMATION OF VORTEX BREAKDOWN OVER THE DIAMOND WING

Yayla S., CANPOLAT Ç., ŞAHİN B., Akilli H.
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , vol.30, no.1, pp.79-89, 2010 (SCI-Expanded) identifier identifier

Dye Visualization of the Flow Structure over a Yawed Nonslender Delta Wing

CANPOLAT Ç., Yayla S., ŞAHİN B., AKILLI H.
JOURNAL OF AIRCRAFT , vol.46, no.5, pp.1818-1822, 2009 (SCI-Expanded) identifier identifier

Articles Published in Other Journals

Effects of Corrugated Plates on Separation Performance

Oruç M., Yayla S.
Yüzüncü Yıl Üniversitesi Fen Bilimleri Enstitüsü Dergisi , vol.27, no.2, pp.286-302, 2022 (Peer-Reviewed Journal) Sustainable Development

Vortex generator design for electrical energy harvesting with piezoelectric in rivers

Yayla S., Ayca S., Oruç M.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.24, no.3, pp.771-777, 2021 (ESCI) Sustainable Development identifier identifier

Petrol-Su Ayrışma Sistemlerindeki Birleştirilmiş Plakaların Ayrışma Verimliliği Üzerindeki Etkisinin Deneysel Olarak İncelenmesi

Oruç M., Yayla S.
Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi , vol.7, no.Özel Sayı, pp.163-174, 2020 (Peer-Reviewed Journal) Sustainable Development

Computational Analysis of Effects of Location of the Diverter Plate and Inlet Velocity on the Efficiency of Two-Phase Flow Separator

Yayla S., Kamal K., BAYRAKTAR S.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.22, no.3, pp.575-581, 2019 (ESCI) Sustainable Development identifier

Wind Potential Analysis for Hakkari Central Region

HARMANCI E., Yayla S.
Machines Technologies Materials , no.12, pp.283-286, 2018 (Peer-Reviewed Journal) Creative Commons License

Visualization Flow on the Pelton Tubine Bucket by CFD

Yayla S., Abdullah A.
Machines Technologies Materials , no.12, pp.244-247, 2018 (Peer-Reviewed Journal)

Hesaplamalı Akışkanlar Dinamiği Kullanılarak Çeşitli Jet Hızları Ve Ayırıcı Açıları İçin Bir Pelton Türbin Kepçesine Etki Eden Kuvvetlerin Belirlenmesi

Yayla S., Abdullah A., Oruç M.
DSİ Teknik Bülteni , no.128, pp.11-21, 2018 (Peer-Reviewed Journal)

Two Phase Flow Separatıon in a Horizontal Separator by Inlet Diverter Plate in Oilfield Industries

Yayla S., Kamal K., Bayraktar S., Oruç M.
International Journal of Mechanical And Production Engineering , vol.5, no.10, pp.97-100, 2017 (Peer-Reviewed Journal)

CFD simulation of designed coalescing plates for separating water and oil in water treatment plants used in petroleum projects

Yayla S., Ibrahim S. S., OLCAY A. B.
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , vol.23, no.4, pp.358-363, 2017 (ESCI) Sustainable Development identifier

Investigation of Single Slotted Cylinder Placed in a Fin Tube Heat Exchanger Model

Yayla S., SAHIN B., Önal S., AKILLI H., Tekşin S.
International Journal of Advancements in Mechanical and Aeronautical Engineering– IJAMAE , no.2, pp.81-86, 2015 (Peer-Reviewed Journal)

Numerical Investigation of Cavitation on Different Venturi Models

Yayla S., YASEEN S., OLCAY A. B.
Yüzüncü Yıl Üniversitesi Fen Bilimleri Enstitüsü Dergisi , vol.20, pp.22-33, 2015 (Peer-Reviewed Journal)

Yüzüncü Yıl Üniversitesi Kampüs Alanının Rüzgâr Enerjisi Potansiyelinin Belirlenmesi

Yayla S., YUMAK H., Bayram A.
Y. Y. Ü. Fen Bilimleri Enstiüsü Dergisi , vol.15, no.1, pp.17-23, 2010 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

EXPERIMENTAL INVESTIGATION OF OIL-WATER SEPARATION EFFICIENCY

Oruç M., Yayla S.
3rd International World Energy Conference (IWEC), Kayseri, Turkey, 4 - 05 December 2023, vol.1, no.1, pp.140-146 Creative Commons License

SYSTEM DESIGN FOR GREEN POWER GENERATION WITH PIEZOELECTRIC MATERIALS

Ayça S., Yayla S.
11th Global Conference on Global Warming (GCGW-2023), İstanbul, Turkey, 14 - 16 June 2023, vol.1, no.1, pp.451-452 Creative Commons License Sustainable Development

NUMERICAL INVESTIGATION OF HEAT TRANSFER MECHANISM ON TRIANGULAR FIN AND OPEN CELL TITANIUM METAL FOAM

Yayla S., Gül A., Oruç M.
12th International Istanbul Scientific Research Congress on Life, Engineering, and Applied Sciences, İstanbul, Turkey, 21 - 23 January 2023, vol.1, no.1, pp.19-33 Sustainable Development

AN EXPERIMENTAL STUDY ON THE TREATMENT OF WASTE WATER BY GRAVITATIONAL METHOD

Oruç M., Yayla S.
II. INTERNATIONAL ISTANBUL CONGRESS (2.ULUSLARARASI İSTANBUL MULTİDİSİPLİNER BİLİMSEL ARAŞTIRMALAR KONGRESİ), İstanbul, Turkey, 28 - 29 September 2022, pp.617-624 Creative Commons License Sustainable Development

EXPERIMENTAL ANALYSIS OF TREATMENT PERFORMANCE BY OPTIMIZATION OF EFFECTIVE PARAMETERS ON CORRUGATED PLATES USED IN TREATMENT SYSTEMS

Oruç M., Yayla S.
Topical Problems of Fluid Mechanics , Praha, Czech Republic, 16 - 18 February 2022, vol.8, no.1, pp.143-150 Creative Commons License

AN EXPERIMENTAL AND NUMERICAL STUDY FOR ENERGY HARVESTING WITH PIEZOELECTRICITY IN RIVERS

Yayla S., Ayça S., Oruç M.
TOPICAL PROBLEMS OF FLUID MECHANICS, Praha, Czech Republic, 16 - 18 February 2022, vol.8, no.1, pp.208-215 Creative Commons License

AN EXPERIMENTAL AND NUMERICAL CASE STUDY ON COALESCING PLATES USED IN OIL-WATER SEPARATION

Oruç M., Yayla S.
15th INTERNATIONAL COMBUSTION SYMPOSIUM, Kayseri, Turkey, 17 - 19 September 2020, pp.360-368 Sustainable Development

AKARSULARDA PİEZOELEKTRİK İLE ELEKTRİK ENERJİSİ HASADI İÇİN GİRDAP ÜRETİCİ TASARIMI

Yayla S., Ayça S., Oruç M.
22nd Congress on Thermal Science and Technology (CTST 2019), Kocaeli, Turkey, 11 - 14 September 2019, pp.17-27

Cfd Simulation of Impact the Inlet Diverter Plate Location on Efficiency of Horizontal Separator

Yayla S., kamal K., Oruç M.
22nd Congress on Thermal Science and Technology (CTST 2019), Kocaeli, Turkey, 11 - 14 September 2019, pp.28-38

A Revıew on Design Optimization of Passive Micromixers

Yayla S., AGHA A. T.
2nd International Congress on Engineering and Architecture (ENAR), Muğla, Turkey, 22 - 24 April 2019, pp.1-12

HAD ile Bir Rüzgâr Türbin Kanatı Tasarımı ve Analizi

Yayla S., KARAKAYALI F.
2nd International Congress on Engineering and Architecture (ENAR), Muğla, Turkey, 22 - 24 April 2019, pp.1-11

Van İli Belirli İlçeleri İçin Hesaplanan Rüzgar Potansiyellerinin Karşılaştırılması

Yayla S., HARMANCI E.
2nd International Congress on Engineering and Architecture (ENAR), Muğla, Turkey, 22 - 24 April 2019, pp.1-16

Numerical Simulation of the Coalescing Oil/Water Separator

Yayla S., Oruç M.
International Conference on Engineering Technologies (ICENTE'18), Konya, Turkey, 26 - 28 October 2018, pp.553-557 Sustainable Development

Electrical Energy Harvesting with Piezoelectric

Oruç M., Yayla S.
International Conference on Engineering Technologies (ICENTE'18), Konya, Turkey, 26 - 28 October 2018, pp.558-562

Flow Analysis for Different Pelton Turbine Bucket by Applying Computation Fluid Dynamic

Yayla S., Abdullah A.
19th International Conference on Mechanical and Aerospace Engineering– ICMAE 2017, Paris, France, 19 - 20 October 2017, pp.1-15

Numerical Investigation of Cavitation on Different Venturi Shapes by CFD

Yayla S., Oruç M., YASEEN S.
19th International Conference on Mechanical and Aerospace Engineering– ICMAE 2017, Paris, France, 19 October - 20 September 2017, pp.1-115

Hakkari İli Rüzgar Hızı Potansiyelinin Yapay Sinir Ağları Metodu İle Belirlenmesi

Yayla S., HARMANCI E.
ULIBTK’17 21. Ulusal Isı Bilimi ve Tekniği Kongresi, Çorum, Turkey, 13 - 16 September 2017, pp.1-10

Two Phase Flow Separatıon in a Horizontal Separator by Inlet Diverter Plate in Oilfield Industries

Yayla S., kamal K., BAYRAKTAR S., Oruç M.
International Conference on Science and Innovative Engineering (ICSIE), Barselona, Spain, 24 - 25 August 2017, pp.1-10

CFD Simulation For Designinig Two Different Shapes of the Venturi For Showing Cavitation in Two Phase Flow

Yayla S., YASEEN S., OLCAY A. B.
Conference on Advances in Mechanical Engineering– ICAME 2016, İstanbul, Turkey, 11 - 13 May 2016, pp.1-10

The separation of Water and Oil in Water Treatment Plant in Petroleum Project Using Coalescing Plate Seperator and CFD Simulation

Yayla S., Sabah S., OLCAY A. B.
International Congress on Engineering and Information- ICEAI 2016, Osaka, Japan, 10 - 12 May 2016, pp.1-10 Sustainable Development

Esnek Bir Parça Eklenerek Silindir Etrafındaki Akış Yapısının Parçacık Görüntülemeli Hız Ölçme Yöntemiyle İncelenmesi

Yayla S., Tekşin S.
20. Ulusal Isı Bilimi ve Tekniği Kongresi, Balıkesir, Turkey, 2 - 05 September 2015, pp.172

Effects of Perturbation on the Flow over Nonslender Delta Wings

Yayla S., SAHIN B., CANPOLAT C., AKILLI H.
45th AIAA Fluid Dynamics Conference, Dallas, United States Of America, 22 - 26 June 2015, pp.1-10

Investigation of Single Slotted Cylinder Placed in a Fin Tube Heat Exchanger Model

Yayla S., SAHIN B., AKILLI H., Tekşin S.
Mechanical and Automation Engineering - MAE 2015, Roma, Italy, 18 - 19 May 2015, pp.10-15

Experimental Study of Flow Characteristics for a Cylinder with Respect to Attached Flexible Strip Body of Various Reynolds Number

Yayla S., Tekşin S.
: ICMAE 2015 : 18th International Conference on Mechanical and Aerospace Engineering, Jeddah, Saudi Arabia, 26 - 27 January 2015, vol.2, no.1, pp.1

Investigation of Effect of Boundary Layer on Flow Structure Around a Cylinder with a Strip

Yayla S., Tekşin S.
9th International Conference on Experimental Fluid Mechanics, Cesky Krumlov, Czech Republic, 18 - 21 November 2014, vol.92 identifier identifier

Comparison of Flow Structures in the Downstream Region of a Cylinder with Flexible Strip

Tekşin S., Yayla S.
9th International Conference on Experimental Fluid Mechanics, Cesky Krumlov, Czech Republic, 18 - 21 November 2014, vol.92 identifier identifier

Investigation of Flow Structure Around a Cylinder with a Strip by Effect of Boundary Layer

Yayla S., Tekşin S.
Experimental Fluid Mechanics 2014, Cesky Krumlov, Czech Republic, 18 - 21 November 2014, vol.92, pp.4

Kanatlara Salınım Verilerek Elde Edilen Girdap Oluşumunun Delta Kanat Aerodinamiğine Etkisi

Yayla S., SAHIN B., CANPOLAT C., AKILLI H.
19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun, Turkey, 9 - 12 September 2013, pp.228-233

Flow and Heat Transfer Characteristics of the Staggered Slotted Semi Cylinders in a Cross Flow Heat Exchangers

Yayla S., Oztekin A.
65th Annual Meeting of the APS Division of Fluid Dynamics, San Diego, California, United States Of America, 18 - 20 November 2012, vol.57, no.17, pp.1

Vangölü Kıyısı Üzerinde Bir Bölgenin Rüzgar Enerjisi Potansiyelinin Belirlenmesi

Yayla S., YUMAK H., Almalı M. N.
8. Ulusal Temiz Enerji Sempozyumu, Bursa, Turkey, 18 December 2010, pp.159-166

Sapma Açısının Delta Kanat Üzerindeki Girdap Yapısına Etkileri

Yayla S., SAHIN B., CANPOLAT C.
III. Ulusal Havacılık ve Uzay Konferansı, Eskişehir, Eskişehir, Turkey, 16 - 18 September 2010, pp.1-5

Investigation of the Flow Structure over a Nonslender Delta Wing: Effect of Yaw Angle

Yayla S., SAHIN B., CANPOLAT C., AKILLI H.
7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2010), Antalya, Turkey, 19 - 21 July 2010, pp.1-2

Effect of Yaw Angle on the Vortex Formation over a Nonslender Delta Wing

Yayla S., SAHIN B., CANPOLAT C., AKILLI H.
5. Ankara Internatıonal Aerospace Conference, Ankara, Turkey, 17 - 19 August 2009, vol.30, no.17, pp.79-89

Hücum Açısının Lambda Kanat Modeli Üzerinde Oluşan Akışa Etkisi

Yayla S., SAHIN B., CANPOLAT C., AKILLI H.
17. Ulusal Isı Bilimi ve Tekniği Kongresi, Sivas, Turkey, 24 - 27 June 2009, pp.98-103

Elmas Kanat Modelinde Oluşan Girdap Çökmesine Hücum Açısının Etkisi

Yayla S., SAHIN B., CANPOLAT C., AKILLI H.
” Ç.Ü. Müh-Mim Fak. 30. Yıl Sempozyumu, Adana, Turkey, 16 - 17 October 2008, vol.30, no.1, pp.79-89

Sapma Açısına Bağlı Olarak Lambda Kanat Üzerindeki Akış Yapısının İncelenmesi

Yayla S., SAHIN B., CANPOLAT C., AKILLI H.
II. Ulusal Havacılık ve Uzay Konferansı, İstanbul, Turkey, 15 - 17 October 2008, pp.1-5

Sapma Açısı Değişiminin Düşük Süpürme Açılı Delta Kanat Üzerindeki Akış Yapısına Etkileri

Yayla S., SAHIN B., CANPOLAT C., AKILLI H.
II. Ulusal Havacılık ve Uzay Konferansı, İstanbul, Turkey, 15 - 17 October 2008, pp.1-12

Düşük Süpürme Açısına Sahip Delta Kanat Üzerindeki Akış Yapısının İncelenmesi

Yayla S.
VII. Havacılık Sempozyumu, Kayseri, Turkey, 15 - 16 May 2008, pp.225-230

Art Arda Yerleştirilen Küreler Etrafındaki Akış Yapısının Deneysel Olarak İncelenmesi

Yayla S., Özgören M., SAHIN B.
16. Ulusal Isı Bilimi ve Tekniği Kongresi, Kayseri, Turkey, 30 May - 02 June 2007, vol.16, no.1, pp.1

Delta Kanatta Oluşan Girdap Çökmesine Sapma Açısının Etkisi

Yayla S., CANPOLAT C.
16. Ulusal Isı Bilimi ve Tekniği Kongresi, Kayseri, Turkey, 30 May - 02 June 2007, vol.30, no.1, pp.79-89

Küre Etrafındaki Akış Yapısının Parçacık Görüntülemeli Hız Ölçme Yöntemiyle İncelenmesi

Yayla S., SAHIN B., AKILLI H.
I. Ulusal Havacılık ve Uzay Konferansı, Ankara, Turkey, 21 - 23 September 2006, pp.1-12

Other Publications

Van İli Rüzgar Enerji Potansiyeli

Yayla S.
Presentation, pp.47-53, 2012

Metrics

Publication

76

Citation (WoS)

197

H-Index (WoS)

9

Citation (Scopus)

267

H-Index (Scopus)

11

Project

10

Thesis Advisory

10

Open Access

2
UN Sustainable Development Goals